DOCUMENTS
 Country
Report (Expertise Centre)
COUNTRY REPORT 2006 - 2007
Standardisation
Testing, Certification, and Inspection
Accreditation
Metrology
(26 February 2007)
Etienne Dupont
Bertil Sjöberg
Merih Malmqvist
Kim Carneiro
This report was prepared by
CEN European Committee for Standardisation
Rue de Stassart
36
B-1050 Brussels
On
behalf of the European Commission. All further requests for
information should be addressed to CEN
The findings, conclusions
and interpretations expressed in this document are those of
the authors only and should in no way be taken to reflect
the policies or opinions of the European Commission
| TABLE
OF CONTENTS |
| 1 Executive
Summary |
|  1.1 General
conclusions
|
| 1.2 Standardisation |
| 1.3 Testing,
certification and inspection |
| 1.4 Accreditation |
| 1.5 Metrology |
| 2 Introduction |
| 2.1 Background |
| 2.2 Method
of Work |
| 3 What
has been achieved since 2002 |
| 3.1 Legislation |
| 3.2 Standardisation
system |
| 3.3 Conformity
Assessment and consumer protection |
| 3.4 Accreditation
system |
| 3.5 Metrology |
| 4 Closing
seminar on implementation of specific directives |
| 4.1 Workshop
I: Machinery, LVD, EMC, Lifts |
| 4.2 Workshop
II: CPD |
| 4.3 Workshop
III: PED, SPVD, NHWBD |
| 4.4 Workshop
IV: Consumer products, Toys, MID, NAWI, Household
appliances |
| 4.5 Questionnaire |
| 5 What
remains to be achieved after 2006 |
| 5.1 Legislation |
| 5.2 Standardisation
system |
| 5.3 Conformity
Assessment and consumer protection |
| 5.4 Accreditation
system |
| 5.5 Metrology |
| 6 Key
organisations of the quality infrastructure |
| 6.1 Turkish
Standards Institute (standardisation only) |
| 6.2 Conformity
Assessment Bodies |
| 6.3 TÜRKAK
– Turkish National Accreditation Agency |
| 6.4 Key
institutions in metrology |
| 7 Annexes |
| 7.1 Annex
1: List of acronyms and abbreviations |
| 7.2 Annex
2: Geographic coverage |
| 7.3 Annex
3: List of all organisations visited during the 5 years |
| 7.4 Annex
4: Participants of the closing seminar |
| 7.5 Annex
5: List and information on New Approach Directives |
| 7.6 Annex
6: TSE organisation chart |
| 7.7 Annex
7: TURKLAB membership list |
| 7.8 Annex
8: TURKLAB Articles of Association, extract |
| 7.9 Annex
9: DTM expectations for 2007 |
| 7.10 Annex
10: Statistics on TSE testing activities |
| 7.11 Annex
11: TSE Product Certification |
| 7.12 Annex
12: TSE System Certification, statistics |
| 7.13 Annex
13: Turkish potential Notified Bodies |
| 7.14 Annex
14: Ministry of Industry and Trade, Market surveillance
2004 to
2006 |
| 7.15 Annex
15: TSE Calibration |
| 7.16 Annex
16: TSE progress towards becoming a Notified Body |
| 7.17 Annex
17: Answers to the symposium questionnaire |
last updated: 21.03.2007
burcak.oztekin@expert-centre.org
|
